With MOT tests getting much harder, it’s a worry of all individuals minds their vehicle will fail. However, a fail doesn’t always mean you vehicle is really a dying trap and requires a lot of repairs, like a fail could be because of one easy ingredient that might have been fixed previously. Undertaking a couple of simple inspections before your MOT test will allow you to accomplish the repairs before that necessary MOT make sure hopefully pass it very first time.

To begin with check all of the lights. Make certain they function properly which they instantly seriously the moment you lightly press the switch. Also check there’s no harm to the lens or casing. Special attention is required if this involves the registration plate lights as they should be examined in the evening or later, because the light isn’t easily observed in daylight.

Another major fail of MOT’s would be the tyres. Avoid failing by checking the tyres are inflated towards the proper pressure which there’s still at least single.6mm tread across 75 % from the tyre. Then inspect the tyres for just about any mounds or cuts, which might mean your tyres have to be changed.

Inspect the windshield for damage too. If you notice any chips or cracks, your windshield may require changing. However, a nick or crack under 10mm around the driver’s side or 40mm around the passenger’s side is permitted.

It’s also wise to look into the condition and functionality of each one of the following:

-The Horn

-Hazard lights

-Mirrors

-Chair

-Seatbelt

-Wipers and washing machines

-Gas cap

-And also the Registration plate.

Testing these before your MOT can help you understand the health of your vehicle and pass that MOT test. Remember to reserve your MOT per week approximately before your MOT date, just like any repairs then can be achieved quickly as well as your vehicle be retested again before your MOT test date

About The Author